· The Taylor 500 range of high security electrically operated mortice locks are designed to retrofit existing European size lock cases.
· Designed exclusively by Andrew Taylor, one of Europe’s leading lock designers with over 40 years experience and thousands of locks already developed and sold. The revolutionary new mechanism is mounted in a DIN standard mortice lock case for ease of installation within the thickness of a typical exit door.
· The mechanical operation has been independently tested to comply with the requirements of British Standard BS EN 3621:2004, thereby ensuring acceptance and approval by all leading Insurance Companies.
· All electronic controls are fitted within the lock case ensuring that connecting wires, usually vulnerable to tampering and vandalism in any conventional access control system, are protected by the hardened steel anti-drill plates fitted to each side of the lock case.
Lock Status Functions:
The Taylor 500 will function as follows and report exceptions, subject to OEM software control.
| Door Open |
Manual Key Operation |
|
Door Locked |
Bolt Jammed – midway |
|
Closed Door Bolt Withdrawn |
Closed Door Bolt Thrown |
BRITISH STANDARD COMPLIANCE
Independent tests carried out by Sold Secure have indicated that the Taylor 500 lock complies with the mechanical requirements of BS3621:2004 by achieving the required categories stated in BS12209:2003 namely;
|
3 |
H |
4 |
0 |
0 |
F |
7 |
K |
A |
0 |
0 |
In furtherance of our support for British Standard compliance for Electromechanically Operated Locks we have sought testing to the draft standard that has yet to be ratified and released, prEN 14846. The test requirements for this standard as defined in BS12209:2003 have indicated achieving the following results
|
3 |
H |
4 |
0 |
0 |
L |
7 |
A |
K |
0 |
0 |